This is an article on how to replace a camshaft position sensor on a sunfire or cavalier 2.2 liter engine.这是一篇文章，就如何更换凸轮轴位置传感器对一的Sunfire或骑士二点二升引擎。 The engine uses this for the timing of the engine and without it, the engine may not run at all.该引擎使用，这对于时间的发动机和没有它，引擎可能无法正常运行在所有。 The cam position sensor could also intermittenly cause running or starting issues.凸轮位置传感器也可以intermittenly事业的运行或启动的问题。 If the engine backfires from another problem, it could cause the computer to show an error even if the sensor is working correctly.如果发动机backfires从另一个问题是，它可以导致计算机显示的错误，即使传感器是否工作正常。 The arrow in the picture points in the general location of the camshaft sensor which is located on the backside of the engine.箭头在图片中各点的大致位置凸轮轴传感器这是坐落于背面的发动机。 First you will need to remove the top air hose which is also located in front the arrow.首先，您需要删除顶端的空气软管，这也是设在前面的箭头。
(Full Article) （全文）
If your car won’t start, there are a few things to try.如果您的汽车将无法启动，有几件事尝试。 First charge the battery for awhile or have it load tested at a car parts store.第一电池充电，为一段时间或有它的负载测试，在汽车零部件商店。 If the battery holds a charge the alternator may be faulty.如果电池持负责发电机可能是错误的。 If the engine clicks but will not turn over after you have verified that the battery is bad, you may have a bad starter.如果引擎的点击次数，但不会交出后，您已验证的电池是坏，您可能有一个坏的精简。 This is a starter replacement on a 1995 cadillac sts with northstar engine.这是一个精简替代对1995年的凯迪拉克STS与northstar引擎。 The starter on the northstar is located below the intake manifold.精简就northstar是位于下方的进气歧管。 To the left you will see the picture of the engine.到左边您会看到图片的引擎。 There are four plastic nuts on the top of the engine cover shown.有四个塑胶螺帽上方的发动机罩显示。 They will need to be removed to access the engine’s intake manifold.他们将必须被清除掉，以获取发动机的进气歧管。 Below the cover in the picture you will see the four spark plug wires.下面的封面中的图片，您会看到四个火花塞的电线。 
