2 Stroke Engine Repair

Category: Snowmobile Engine

two stroke engine

 

 

 

 

 

 

 

 2 Stroke engine repair can be accomplished once the severity of the problem or damage is assesed. As with all engines, they require two basic things to operate. First all engines require fuel. There are a few ways to check if the engine is getting fuel. Remove the spark plug and see if they are wet. If the spark plug is not wet, you can remove the float bowl to see if fuel is being delivered to it. If there is no fuel you can check the needle and seat of the carburetor, or the fuel pump. You can generally repair a sticking needle simply by moving the needle manually. If the 2 stroke engine is fuel injected you will need a fuel pressure gauge and will then need to attach it to the fuel rail. Check that the specified pressure is being reached. If not, the fuel pump is probably faulty. The next important thing to check is that the engine is producing spark.

(Full Article)

Snowmobile Fuel Pump

Category: Snowmobile Engine


Snowmobile fuel pump problems can be diagnosed. A vacuum fuel pump is used on snowmobiles with carburetors. The first thing to look at is the vacuum line that will run to the crankcase. If this hose has any cracks, leaks or is not clamped tightly on to the crankcase fitting, it will not pump fuel. If the fuel pump still wont work, mark where the lines come from and make a line down the side of the pump. Disassemble the pump carefully and look at the diaphragms for cracks. Also inspect for blockage of any of the cavities or passages within the fuel pump. You can also spin the engine over to make sure the crankcase fitting is not blocked. This fitting will produce vacuum and pressure so don’t be alarmed. If you can’t find any problems rebuild or replace the pump. Fuel injected snowmobiles will use an electric fuel pump. First check to see that there is voltage coming to the fuel pump.

(Full Article)

Rotary Valve Engine

Category: Snowmobile Engine

A rotary valve engine is always a two stroke engine. Most rotary valve engines are rotax engines. Although other rotary engines such as suzuki and kawasaki have been made. Rotax engines are used in snowmobiles, jet-skis and motorcycles and aircraft engines. A rotary valve refers to the intake of a two stroke engine. There are three types of intake designs for two stroke engines. Simplistic two strokes are piston port, meaning that the piston movement past the port controls the incoming air timing. The piston port engine doesn’t do a very good job of keeping the airflow to stay in the engine. The air can simply travel back out of the engine. The most popular intake air induction is the reed port engine. It uses reed petals to allow the intake air in the engine and traps it there. The tension of the reed petals can change with the use of different petals and can provide some power improvement at certain rpm ranges. A rotary valve engine has the best intake air control.

(Full Article)