check engine-motor trouble codes
Testing trouble codes is easy. This is a basic how to, on checking trouble codes. All codes supplied here are for pre OBD-2 cars (1996), newer cars can be checked at autozone for free! First turn key forward but don’t start. If you know where the diagnostic plug is, you can use a paperclip to check the codes by jumping the top right (usually) two wires in the plug. GM-bottom of dash. Turn your ignition key forward, codes will flash on the check/ service engine soon light. The code will come up three times then alternate to the next error code, don’t worry about the first code 12. The car ignition is off = 12. A code of 13 will look like this 0 = flashes 0_000, 0_000, 0_000 (larger pause) then will alternate to the next code. Dodge, turn the ignition switch on and off twice, then turn forward (do not start engine) and keep it there. Check engine light will also be used for Dodge vehicles. Dodge codes work same as GM. Ford-under hood and find diagnostic plug labeled EEC Test. Use a jumper wire to connect the single external plug to jump to the main 6 prong plug. Look at the plug with the row of four at the bottom, next look at the next row of two on top.
